Taktování Core2Duo E6750
Napsal: pon úno 04, 2008 17:01
Ahoj mám procesor INTEL Core2Duo E6750 2,66GHz.
Přetaktoval jsem si ho na 3,4GHz - 425MHz x 8 (násobič), napětí = 1,375000V, Default při 2,66 GHz - 1,225000V.
Spustil jsem si orthos na 2 jádra (pomocí přepínače) a asi po cca 20 sec. mi to test stoplo a ukázalo chybu, tak sem to vypl a spustil znova a resetlo mi to PC.
Díval sem se na výpis testu a je tam tohle: More than one CPU detected.
You should run two copies of SP2004 simultaneously.
More than one CPU detected.
You should run two copies of SP2004 simultaneously.
Type: Small FFTs - stress CPU Min: 8 Max: 8 InPlace: Yes Mem: 8 Time: 15
CPU: 3400MHz FSB: 425MHz [425MHz x 8.0 est.]
4.2.2008 16:46 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 13 seconds - 1 errors, 0 warnings.Execution halted. Nevíte čím to je? Mám přidat napětí? Chladič mám NOCTUA NH-U12P.....
Prosím poraďte a DÍK.... 
Přetaktoval jsem si ho na 3,4GHz - 425MHz x 8 (násobič), napětí = 1,375000V, Default při 2,66 GHz - 1,225000V.
Spustil jsem si orthos na 2 jádra (pomocí přepínače) a asi po cca 20 sec. mi to test stoplo a ukázalo chybu, tak sem to vypl a spustil znova a resetlo mi to PC.
Díval sem se na výpis testu a je tam tohle: More than one CPU detected.
You should run two copies of SP2004 simultaneously.
More than one CPU detected.
You should run two copies of SP2004 simultaneously.
Type: Small FFTs - stress CPU Min: 8 Max: 8 InPlace: Yes Mem: 8 Time: 15
CPU: 3400MHz FSB: 425MHz [425MHz x 8.0 est.]
4.2.2008 16:46 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 13 seconds - 1 errors, 0 warnings.Execution halted. Nevíte čím to je? Mám přidat napětí? Chladič mám NOCTUA NH-U12P.....

